RDT RM96xx Bedienungsanleitung PDF herunterladen (Seite 10)

Smart_DP RM 9600 User Manual

Seite 9

F - Configuration

In order to use the whole function of the Smart_DP device, some parameters must be set ac-

cording to the respective working scenario. The user has three possibilities to configure the

Profibus-DP/RS-232 interface:

 Set the bus address via the code switches

 RS-232 configuration software for setting the bus address parameter

 Configuration via the project tool of the respective master system through the

GSD file, and the 'SetSlaveAddress-telegram'

Profibus parameter RS-232 Profibus-

DP / GSD

Code

switches

Description

DP-address r/w r/w w Hardware address of Smart_DP

Serial Interface

Speed r/w r/w n.a. Baudrate

Bits r/w r/w n.a. Length of data word

Stop bits r/w r/w n.a. Stop bits

Handshake n.a. n.a. n.a. Handshake mode, not implemented

Parity r/w r/w n.a. Parity

Additional parameter

Serial number r n.a. n.a. Serial number

Firmware version number r n.a. n.a. Firmware version

(Legend: r read, w write, n.a. not available)

The table above shows, which parameters can be read or set by which tool.

Important note:

If the Smart_DP cannot be found in the Profibus network, the setting of the bus address

should in any case first be done by means of the code switches!

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Keine Kommentare

RDT RM96xx Bedienungsanleitung Seite 10